Surfacing Machine
CNC Grinding and Milling Machine for Cylinder Heads and Blocks
MG1400B
- Introduction
- Specitications
- Features
- Accessories
- Required Space
- Photo Gallery
- Download
- Introduction
- Specitications
- Features
- Accessories
- Required Space
- Photo Gallery
- Download
CNC grinding and milling machine for cylinder heads and blocks Model: MG-1400B is new solution for medium and large size engine reconditioning needs. The Grinding head longitudinal moving and vertical moving are controlled by servo motor with high precision ball screws, the vertical moving is also equipped DRO. & linear scale for grinding/milling feed. The spindle speed can be controlled from 150 to 1400 rpm, so that the machine can be used for any type of machining application (milling and grinding) and material, thus providing extremely high quality surfacing without increased cycle times.
Model | MG-1400B |
Control System | EasyTouch 3 Axis |
Spindle Speed | 150 ~ 1400 rpm stepless |
Grinding Wheel Motor | 4 kW |
Grinding Wheel Traverse Motor | 0.75 kW |
Downfeed Motor | 0.4 kW |
Coolant Pump Motor | 0.12 kW |
Capacity of Coolant Tank | 100 Litres |
Max. Grinding Length | 1400 mm |
Max. Grinding Width | 400 mm |
Max. Height of Work Piece | 800 mm |
Working Table Surface ( L×D ) | 1400×600 mm |
Grinding Head Diameter | 400 mm |
Number of Segments | 12 piece |
Vertical Movement of Grinding Wheel | 180 mm |
Grinding Wheel Traverse Speeds , Stepless | 200 ~ 2000 mm / min |
Length of Machine | 2200 mm |
Width of Machine | 1080 mm |
Max. Height of Machine | 2250 mm |
Min. Height of Machine | 2100 mm |
Flatness for Grinding | 0.015 mm / 300 mm |
Surface Roughness for Grinding | Ra 0.45 |
Package Size ( L×D×H ) | 3000×1150×2250 mm |
N.W. | 3500 Kg |
G.W. | 4000 Kg |
1.Spindle motor, traverse motor and downfeed motor are controlled by EasyTouch 3 Axis system with easy operation to stepless speed variation.
2.ABB High performance spindle motor, High torque output smoothly without vibration, the traverse and downfeed uses servo motor with high precision ball screws, and the downfeed moving is also equipped DRO. & linear scale for grinding/milling feed.
3.The top slider guideway is designed with plastic-coated guide rails, providing good vibration absorption, strong wear resistance and high precision.
4.Spindle sleeve is chrome plated and ground, with a shining and rust-proof surface, and improve the full rigidity of spindle.
5.Integrated electric control modules, No – spark contacts, with safe and reliability. Full safety cover for noise - suppression and dust – proofing.
6.Separated circuits of water and electric, with safe and reliability, as well as chain sleeve for protection.
7.Regardless of the height of the item to be ground the machine has the same rigidity of the grinding head, always giving you the best and fastest grinding result.
8.Regardless of the height of the item to be ground the grinding process always takes place below eye height and easily in sight and reach of the operator.
9.The MG-1400B design makes the machine take up 40~45% less space than other surface grinding machines with the same capacity.
-
Setting-up Blocks Pairs
-
Wheel Balance Stand and Grinding Head φ400mm
-
Grinding Segments, One set Total 12 piece
-
Diamond Dresser
-
Down Feed DRO.
-
CBN Insert for Iron Casting
-
PCD Insert for Aluminium
-
Tools Holder for Circular Inserts
-
CBN Milling Insert
-
Tools Holder for Triangular Inserts
-
Surfacing Cutterhead (φ400mm or 500mm )
-
V-block Setting-up Fixture
-
Extra Special Mini Jack for Cylinder Head
